Valid Fortinet FCP_FGT_AD-7.4 Test Vce & Premium FCP_FGT_AD-7.4 Exam

Blog Article

Tags: Valid FCP_FGT_AD-7.4 Test Vce, Premium FCP_FGT_AD-7.4 Exam, FCP_FGT_AD-7.4 Valid Exam Vce, Exam FCP_FGT_AD-7.4 Reference, FCP_FGT_AD-7.4 Book Free

The product UpdateDumps provide with you is compiled by professionals elaborately and boosts varied versions which aimed to help you pass the FCP_FGT_AD-7.4 exam by the method which is convenient for you. It is not only cheaper than other dumps but also more effective. The high pass rate of our FCP_FGT_AD-7.4 Study Materials has been approved by thousands of candidates, they recognized our website as only study tool to pass FCP_FGT_AD-7.4 exam.

Fortinet FCP_FGT_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing: This section covers how to set up packet routing with static routes and configure SD-WAN for efficient traffic load balancing.
Topic 2	Deployment and System Configuration: This section covers how to set up initial configurations, implement Fortinet Security Fabric, and configure an FGCP HA cluster; diagnose resources and connectivity.
Topic 3	Content Inspection: This section covers how to inspect encrypted traffic, configure inspection modes, apply web filtering, manage applications, set antivirus modes, and implement IPS for security.
Topic 4	Firewall Policies and Authentication: This topic covers how to set firewall policies, configure SNAT DNAT, implement authentication methods, and deploy FSSO.
Topic 5	VPN: In this section, the focus is on how to configure SSL VPNs for secure network access and implement meshed or redundant IPsec VPNs.

>> Valid Fortinet FCP_FGT_AD-7.4 Test Vce <<

Premium FCP_FGT_AD-7.4 Exam - FCP_FGT_AD-7.4 Valid Exam Vce

You may now download the FCP_FGT_AD-7.4 PDF documents in your smart devices and lug it along with you. You can effortlessly yield the printouts of FCP_FGT_AD-7.4 exam study material as well, PDF files make it extremely simple for you to switch to any topics with a click. While the Practice Software creates is an actual test environment for your FCP_FGT_AD-7.4 Certification Exam. All the preparation material reflects latest updates in FCP_FGT_AD-7.4 certification exam pattern.

Fortinet FCP - FortiGate 7.4 Administrator Sample Questions (Q59-Q64):

NEW QUESTION # 59
A network administrator is configuring an IPsec VPN tunnel for a sales employee travelling abroad.
Which IPsec Wizard template must the administrator apply?

A. Site to Site
B. iHub-and-Spoke
C. Remote Access
D. Dial up User

Answer: C

Explanation:
For configuring an IPsec VPN tunnel for a sales employee traveling abroad, the "Remote Access" template is the most appropriate choice. This template is designed to allow remote users to securely connect to the internal network of an organization from any location using FortiClient or a compatible client. The other options, such as "Site to Site," "Dial up User," and "iHub-and-Spoke," are used for connecting different networks or sites, not individual remote users.
References:
* FortiOS 7.4.1 Administration Guide: IPsec Wizard Template Types

NEW QUESTION # 60
Refer to the exhibit.

The exhibit shows a FortiGate configuration.
How does FortiGate handle web proxy traffic coming from the IP address 10.2.1.200, that requires authorization?

A. It drops the traffic
B. It authenticates the traffic using the authentication scheme SCHEME1.
C. It authenticates the traffic using the authentication scheme SCHEME2.
D. It always authorizes the traffic without requiring authentication.

Answer: B

Explanation:
It authenticates the traffic using the authentication scheme SCHEME1.
What happens to traffic that requires authorization, but does not match any authentication rule? The active and passive SSO schemes to use for those cases is defined under config authentication setting.

NEW QUESTION # 61
Refer to the exhibit.

The exhibit shows a diagram of a FortiGate device connected to the network, the firewall policy and VIP configuration on the FortiGate device, and the routing table on the ISP router.
When the administrator tries to access the web server public address (203.0.113.2) from the internet, the connection times out. At the same time, the administrator runs a sniffer on FortiGate to capture incoming web traffic to the server and does not see any output.
Based on the information shown in the exhibit, what configuration change must the administrator make to fix the connectivity issue?

A. In the VIP configuration, enable arp-reply.
B. In the firewall policy configuration, enable match-vip.
C. Enable port forwarding on the server to map the external service port to the internal service port.
D. Configure a loopback interface with address 203.0.113.2/32.

Answer: A

Explanation:
In the routing table of the ISP we can see that the route is C (connected) which means that if there is no ARP entry, traffic will be dropped by the ISP, and this is why there is no packets in the forti sniffer.
The external interface address is different from the external address configured in the VIP. This is not a problem as long as the upstream network has its routing properly set. You can also enable ARP reply on the VPN (enabled by default, here disabled) to facilitate routing on the upstream network.
Enabling ARP reply is usually not required in most networks because the routing tables on the adjacent devices contain the correct next hop information, so the networks are reachable. However, sometimes the routing configuration is not fully correct, and having ARP reply enabled can solve the issue for you.
For this reason, it's a best practice to keep ARP reply enabled.

NEW QUESTION # 62
Refer to the exhibit.

Why did FortiGate drop the packet?

A. It failed the RPF check.
B. 11 matched an explicitly configured firewall policy with the action DENY
C. The next-hop IP address is unreachable.
D. It matched the default implicit firewall policy

Answer: D

Explanation:
The debug trace output shows that the packet was "Denied by forward policy check (policy 0)." In FortiGate, policy ID 0 corresponds to the default implicit deny policy. This means that if a packet does not match any configured firewall policies, it is denied by the default implicit policy.
References:
* FortiOS 7.4.1 Administration Guide: Firewall Policies

NEW QUESTION # 63
Refer to the exhibit, which contains a session list output.

Based on the information shown in the exhibit, which statement is true?

A. Destination NAT is disabled in the firewall policy
B. Overload NAT IP pool is used in the firewall policy
C. One-to-one NAT IP pool is used in the firewall policy
D. Port block allocation IP pool is used in the firewall policy

Answer: C

Explanation:
One-to-one NAT IP pool is used in the firewall policy.
In one-to-one, PAT is not required.
In the one-to-one pool type, an internal IP address is mapped with an external address on a first-come, first-served basis.
There is a single mapping of an internal address to an external address. Mappings are not fixed and, if there are no more addresses available, a connection will be refused.
Also, in one-to-one, PAT is not required. In the example on this slide, you can see the same source port is shown for both the ingress and egress address.

NEW QUESTION # 64
......

Do you always feel that your gains are not proportional to your efforts without valid FCP_FGT_AD-7.4 study torrent? Do you feel that you always suffer from procrastination and cannot make full use of your sporadic time? If your answer is absolutely yes, then we would like to suggest you to try our FCP_FGT_AD-7.4 Training Materials, which are high quality and efficiency FCP_FGT_AD-7.4 test tools. Your success is 100% ensured to pass the FCP_FGT_AD-7.4 exam and acquire the dreaming certification which will enable you to reach for more opportunities to higher incomes or better enterprises.

Premium FCP_FGT_AD-7.4 Exam: https://www.updatedumps.com/Fortinet/FCP_FGT_AD-7.4-updated-exam-dumps.html

Report this page

VALID FORTINET FCP_FGT_AD-7.4 TEST VCE & PREMIUM FCP_FGT_AD-7.4 EXAM

Valid Fortinet FCP_FGT_AD-7.4 Test Vce & Premium FCP_FGT_AD-7.4 Exam